HP 445942-001 manual Snmp-server group

	Configuration Commands
Table 83 SNMPv3 Configuration commands
Command	Description
snmp-server group <1-16>	Configures an SNMP group. A group maps the user name to the access group
	names and their access rights needed to access SNMP management objects.
	A group defines the access rights assigned to all names that belong to a
	particular group. The range is 1-16.

Command mode: Global configuration

snmp-server community <1-16>

snmp-server target-address <1-16>

snmp-server target- parameters <1-16>

Configures a community table entry. The community table contains objects for mapping community strings and version-independent SNMP message parameters. The range is 1-16.

Command mode: Global configuration

Configures the destination address and user security levels for outgoing notifications. This is also called the transport endpoint. The range is 1-16.

Command mode: Global configuration

Configures SNMP parameters, consisting of message processing model, security model, security level, and security name information. There may be multiple transport endpoints associated with a particular set of SNMP parameters, or a particular transport endpoint may be associated with several sets of SNMP parameters. The range is 1-16.

Command mode: Global configuration

snmp-server notify <1-16>

snmp-server version {v1v2v3v3only}

show snmp-server v3

Configures a notification index. A notification application typically monitors a system for particular events or conditions, and generates Notification-Class messages based on these events or conditions. The range is 1-16.

Command mode: Global configuration

Enables or disables the access to SNMP version 1 and version 2. This command is enabled by default.

Command mode: Global configuration

Displays the current SNMPv3 configuration.

Command mode: All

112