Statistics Commands
VRRP statistics
Virtual Router Redundancy Protocol (VRRP) support on the HP 10GbE switch provides redundancy between routers in a LAN. This is accomplished by configuring the same virtual router IP address and ID number on each participating
One of the virtual routers is then elected as the master, based on a number of priority criteria, and assumes control of the shared virtual router IP address. If the master fails, one of the backup virtual routers will assume routing authority and take control of the virtual router IP address.
When virtual routers are configured, you can display protocol statistics for VRRP: The following command displays statistics for the VRRP LAN:
show ip vrrp counters Command mode: All except User EXEC
>> Layer 3 Statistics# vrrp |
|
|
|
VRRP statistics: |
|
|
|
vrrpInAdvers: | 0 | vrrpBadAdvers: | 0 |
vrrpOutAdvers: | 0 |
|
|
vrrpBadVersion: | 0 | vrrpBadVrid: | 0 |
vrrpBadAddress: | 0 | vrrpBadData: | 0 |
vrrpBadPassword: | 0 | vrrpBadInterval: | 0 |
The following table describes the VRRP statistics.
Table 65 VRRP statistics
Field
vrrpInAdvers
vrrpOutAdvers
vrrpBadVersion
vrrpBadAddress
vrrpBadPassword
vrrpBadAdvers
vrrpBadVrid
vrrpBadData
vrrpBadInterval
Description
The total number of VRRP advertisements that have been received. The total number of VRRP advertisements that have been sent.
The total number of VRRP advertisements that had a bad version number. The total number of VRRP advertisements that had a bad address.
The total number of VRRP advertisements that had a bad password. The total number of VRRP advertisements received that were dropped. The total number of VRRP advertisements that had a bad virtual router ID. The total number of VRRP advertisements that had bad data.
The total number of VRRP advertisements that had a bad interval.
91
