
Configuration Commands
Port configuration
Use the port configuration commands to configure settings for individual switch ports.
NOTE: Port 17 is reserved for switch management.
The following table describes the Port Configuration commands. The following sections provide more detailed information and commands.
Table 97 Port Configuration commands
Command | Description |
|
|
interface port {<port | Enter Interface Port configuration mode for the selected port. |
number>} | Command mode: Global configuration |
| |
|
|
dot1p | Configures the port’s 802.1p priority level. |
| Command mode: Interface port |
|
|
pvid | Sets the default VLAN number which will be used to forward frames which |
| are not VLAN tagged. The default number is 1. |
| NOTE: VLAN 4095 is reserved for switch management. |
| Command mode: Interface port |
|
|
name | Sets a name for the port (maximum 64 characters). The assigned port name |
| displays next to the port number on some information and statistics screens. |
| Command mode: Interface port |
|
|
[no] rmon | Enables or disables Remote Monitoring for the port. RMON must be |
| enabled for any RMON configurations to function. |
| Command mode: Interface port |
|
|
[no] tagging | Disables or enables VLAN tagging for this port. It is disabled by default. |
| Command mode: Interface port |
|
|
[no] | Disables or enables VLAN tag persistence. When disabled, the VLAN tag is |
| removed from packets whose VLAN tag matches the port PVID. The default |
| value is enabled. |
| Command mode: Interface port |
|
|
Limits the number of broadcast packets per second to the specified value. If | |
| disabled (dis), the port forwards all broadcast packets. |
| Command mode: Interface port |
|
|
Limits the number of multicast packets per second to the specified value. If | |
disabled (dis), the port forwards all multicast packets. | |
| Command mode: Interface port |
|
|
Limits the number of unknown unicast packets per second to the specified | |
value. If disabled (dis), the port forwards all unknown unicast packets. | |
| Command mode: Interface port |
|
|
no shutdown | Enables the port. |
| Command mode: Interface port |
|
|
| 123 |