HP 445942-001 manual SNMPv3 Notify Table configuration

	Configuration Commands
Table 90 SNMPv3 Target Parameters Table Configuration commands
Command	Description
snmp-server target-parameters <1-16>	Selects the level of security to be used when generating the
level {noAuthNo-	SNMP messages using this entry. The level noAuthNoPriv
PrivauthNoPrivauthPriv}	means that the SNMP message will be sent without authen-
	tication and without using a privacy protocol. The level
	authNoPriv means that the SNMP message will be sent with
	authentication but without using a privacy protocol. The
	authPriv means that the SNMP message will be sent both
	with authentication and using a privacy protocol.
	Command mode: Global configuration
no snmp-server target-parameters	Deletes the targetParamsTable entry.
<1-16>	Command mode: Global configuration
show snmp-server target-parameters	Displays the current targetParamsTable configuration.
<1-16>	Command mode: All

SNMPv3 Notify Table configuration

SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for particular events or conditions, and generates Notification-Class messages based on these events or conditions.

The following table describes the SNMPv3 Notify Table Configuration commands. Table 91 SNMPv3 Notify Table Configuration commands

Command	Description
snmp-server notify <1-16>name	Defines a locally arbitrary but unique identifier associated with this
<1-32 characters>	SNMP notify entry.
	Command mode: Global configuration
snmp-server notify <1-16>tag	Defines a tag of 255 characters maximum that contains a tag value
<1-255 characters>	which is used to select entries in the Target Address Table. Any entry in
	the snmpTargetAddrTable, that matches the value of this tag, is
	selected.
	Command mode: Global configuration
no snmp-server notify <1-16>	Deletes the notify table entry.
	Command mode: Global configuration
show snmp-server notify <1-16>	Displays the current notify table configuration.
	Command mode: All

118