Sanyo VA-SW8000 Choose a camera DVR on the tree, Choose one of the tabs, displayed on the tab

DVR Management Menu

(Required user access level: ID4)

1	Choose a camera (DVR) on the tree
	list.
	The selected camera is highlighted in
	blue.
		The [DVR Set] window lets you
		select a camera from the tree list.
		Settings configured on each tab
		are uploaded to the DVR
		connected with your selected
		camera.
2
	Click	.
	The system retrieves current
	configuration information from the DVR,
	and activates all the tabs.
		• You can also import the
		configuration information by
		double-clicking a camera title
		on the tree list, instead of using
		the [Import] button.
		• You can also access the [DVR
		Set] window by selecting the
		[Menu] option on the context
		menu of the tree list. In this
		case, the DVR information is
		automatically loaded without
		clicking [Import] button.
3	Choose one of the tabs.
	You can switch to one of the tabs by
	clicking the tab index.
4	Change operating conditions
	displayed on the tab.

The fields on the tab are populated with the current configuration information, as imported in step 2. Check each field to see the current setting, and change the settings as needed.

101English

5

6

7

Click .

Clicking this button saves the settings displayed on the tab into an edit table in your computer.

At this stage, the configuration information has not yet been sent to the DVR. The text on the tab index turns from black to yellow, indicating that the tab contains changes that have not yet been uploaded.

To configure settings on other tabs as well:

Repeat the above procedure (steps 3 to 5).

When you make any change on a tab, its tab index text turns yellow.

Click when you are done.

Configuration information is uploaded from all the tabs to the DVR, and the tab index text returns from yellow to black.

When you make changes on any tab (so that its index text turns yellow) and attempt to switch to another window without clicking the [OK] button, a confirmation dialog appears. Choose whether to apply the changes by clicking the appropriate button on the confirmation dialog.