Sanyo VA-SW8000LITE Network Connection Requirements, Configuring the TCP/IP Settings, items: O

Network Connection Requirements

Configuring the TCP/IP Settings

To configure the TCP/IP settings on each computer, follow these steps:

The DVR Utility Software supports Windows XP only.

1	On the [Control Panel], click [Network
	and Internet Connections].
	The [Network and Internet Connections]
	window appears.
2	Click [Network Connections].
	The [Network Connections] window
	appears. Make sure that the appropriate
	LAN card (Ethernet adapter) is shown
	under [LAN or High-Speed Internet].
3	Right-click on the LAN card (Ethernet
	adapter), and then select [Properties
	(R)] from the pop-up menu.
	The [Local Area Connection Properties]
	window opens, and the [General] tab is
	selected by default.
4	Make sure that [Internet Protocol
	(TCP/IP)] is checked (selected) under
	[This connection uses the following
	items: (O)].
	If [Internet Protocol (TCP/IP)] is not
	checked, select the check box.
5	Click [Properties (R)].

The [Internet Protocol (TCP/IP) Properties] window opens, and the [General] tab is selected by default.

6	Select the [Use the following IP
	address:] check box, and type in the

IP address and the subnet mask. For the standard configuration, enter a subnet mask of “255.255.252.0”.

7	Check the settings, and then click
	[OK].
	This returns you to the [Local Area
	Connection Properties] window.
8	Click [OK].
	Now the TCP/IP settings have been

configured.

English 6