Sanyo VA-SW8000LITE Click Over 24H, The last two rows seventh and eighth, button again, <Example>

DVR Management Menu

(Required user access level: ID4)

☞To schedule a timer recording that continues for more than 24 hours:

When you want to schedule a timer recording that continues for more than 24 hours, follow these steps:

1	Click [Over 24H].
	The last two rows (seventh and eighth
	rows) are switched to a special format.
	To exit from the special format, click the
	button again.
2	In the upper row, specify the day of
	the week and the time at which to start
	the timer recording.
3	In the lower row, specify the day of the
	week and the time at which to end the

timer recording, and then select the “ON” radio button in the [ON/OFF] area.

<Example>

In this example, a timer recording is scheduled to start at 04:00:00 PM on every Saturday and continue for 30 hours until 22:00 on Sunday.

You can schedule only one timer recording that continues for more than 24 hours.

☞To activate a timer recording schedule:

On this tab, you can only define timer recording schedules. To have the timer recording mechanism actually work based on your defined schedules, you have to click the timer recording button on the control panel.

The scheduled timer recording is put into standby and will automatically start when your start time conditions are met. The title bar of the window shows the timer recording status with the appropriate symbol.

•	Standby	:	C
•	Recording in progress	:	C a

You must have user access level ID3 or higher to operate the timer recording button.

When you have finished configuring the

settings on this tab, click and make sure that the tab index text turns yellow. When you have finished your configuration task across all the tabs, finally click

. Configuration information is

uploaded to the DVR, and the tab index text returns from yellow to black. (For more information on the command buttons, see P103.)

English 112