Sanyo VA-SW8000LITE instruction manual Click the appropriate command button, on the control, panel

Saving or Printing Snapshot Images (Required user access level: ID2/3/4)

6

7

Click the appropriate command button.

Click either of the following two buttons:

•:

This button opens the [Save As] dialog, and you can save the image as a JPEG file by specifying the folder and file name.

•:

This button opens the [Printing] dialog, and you can print the image at the full size by specifying the appropriate print options.

Click [Cancel] to discard all changes.

Click .

This closes the window and brings you back to the previous window where you displayed the still image.

•In the default configuration, the lowest user access level authorized to save still images is ID2; however, you can use the [Options] window under the Initial Set menu to raise the lowest required access level so that users with user access levels ID2 and ID3 cannot access the save mechanism. For more information, see P73.

•The button is disabled unless you display a still

image.

•When you zoom in on an image, you cannot save the image.

●Saving or Printing Images While Playing Back a Downloaded File (see P56)

While playing back a downloaded file, you can save or print still images basically the same way as described in the previous section, except that no thumbnails are displayed.

1	Display a still image.
2	Click	on the control
	panel.
	You are presented with a dialog that
	allows you to save or print the still image.
3	Select the [Overlay Time/Date] check
	box.

Select the [Overlay Time/Date] check box if you want to overlay the image with the file name and time stamp.

4	Click the appropriate command
	button.
	Depending on whether you want to save
	or print the still image, select either
	or	. You can save or

print still images, just as you can while playing back video from a DVR.

English 60