Sanyo VA-SW8000LITE 4 1, 5 6 7, Initial Set Menu, Window Elements and Their Functions

Initial Set Menu

(Required user access level: ID4)

b[Register DVR] window (accessible on the master computer only)

The [Register DVR] window, accessible on the master computer only, allows you to register or delete DVRs connected to the monitoring network.

Slave computers contact the master computer to obtain the DVR registration information.

•Before you can use the DVR Utility Software, you must register DVRs connected to the network. When you start up the master computer for the first time, be sure to perform this initial configuration task.

•The [Register DVR] window displays the tree list and groups intended exclusively for DVR registration and management purposes. When you edit the tree list and groups actually displayed on the user interface, you must use the [Tree Edit] window, rather than the [Register DVR] window. For more information, see P76.

•By default, the DVR Utility Software supports up to 1,000 DVRs connected to the network. If you want to connect more DVRs to the network, you can use the [Options] window to activate the network extension mode, in which you can connect up to 4,000 DVRs. For more information, see P75.

•When you are done, click [OK]. Your changes are saved, and the configuration data is uploaded to the DVRs.

When you make changes and attempt to switch to another window without clicking the [OK] button, a confirmation dialog appears. Choose whether to apply the changes by clicking the appropriate button on the confirmation dialog.

●Window Elements and Their Functions

4

1

2

5

6

7

3

81English