Sanyo VA-SW8000LITE Manual configuration mode, want to register, repeat the same, Addr, Click

Models: VA-SW8000LITE VA-SW8000

1 132
Download 132 pages 63.1 Kb
Page 85
Image 85
●Manual configuration mode

Initial Set Menu

(Required user access level: ID4)

Manual configuration mode

1

Manually configure the IP address on

 

the NETWORK SET screen of the DVR.

 

On NETWORK SET, set [ADDRESS

 

SET] to “MANUAL”, and configure the IP

 

address and subnet mask.

<

NETWORK SET - ADVANCED >

 

ADDRESS SET

:

MANUAL

 

DVR NAME

:

DVR1

 

IP

ADDRESS

:

192.168. 0.

3

SUB NET MASK

:

255.255.255.

0

The last three digits of the IP address must be configured within the range of 001 to 250.

Make sure that the new IP address does not conflict with any existing IP address.

How to configure the IP address differs depending on the DVR model. For more information, refer to the DVR’s user’s manual.

2

When you have additional DVRs you

 

want to register, repeat the same

 

configuration steps for each of them.

3

Select “MANUAL” from [TCP/IP

 

ADDR].

This activates the IP address manual configuration mode.

4

Click

.

 

The system starts creating the

 

registration list, with the command

 

buttons on the windows temporarily

 

disabled.

 

(If you have configured more than one

 

DVR for registration, they are registered

 

at once.)

 

 

 

 

 

Normally, it takes about 20

 

 

seconds to create the list, but it

 

 

may take longer (up to 80 seconds)

 

 

depending on the subnet mask

 

 

setting.

5

 

 

Review the registration information

 

displayed on the list.

 

When the process completes

 

successfully, the tree list and registration

 

list are updated to reflect the registration

 

information of the new DVR, and the

 

command buttons are enabled. Items

 

displayed in the registration list are the

 

same as in auto configuration mode. For

 

more information, see P83.

 

 

 

 

 

If the new DVR you register in

 

 

manual configuration mode has

 

 

already been assigned to a group,

 

 

that group name is inherited.

6

 

 

Editing the Tree List

 

A newly registered DVR is given a default

 

title and group, which you can change as

 

needed.

 

For more information, see P86.

7

Click

.

 

Your changes are saved and uploaded to

the DVR.

English 84

Page 85
Image 85
Sanyo VA-SW8000LITE Manual configuration mode, want to register, repeat the same, Select “MANUAL” from TCP/IP, Addr, Click