Sanyo VA-SW8000LITE Configuring a Timer Download, Choose a DVR, Define the download range by

Using the Tool Menu Options

Configuring a Timer Download

To configure a timer download, follow these steps:

1

Choose a DVR.

On the tree list, click the camera title of the camera connected to your desired DVR. The title is highlighted in blue, and the title of the DVR to which the camera is connected appears in all rows in the [DVR NAME] section.

To override the default destination, click [Browse..] and select your desired folder from the browse list. You can also create a new folder by clicking the [NEW FOLDER] button on the dialog.

		You cannot specify a removable
		drive as the destination.
4
	Define the download range by
	specifying the appropriate date/time.

2

If the DVR has any scheduled download, the date is loaded and displayed on the window. Modify the schedule settings as needed.

Define the download start point.

In the [SCHEDULE] section, specify the date of the week and the time at which to start the download.

When you want to schedule the download to occur at the same time every day, select “DLY”.

Depending on what you chose from the [WEEK] drop-down list in the [SCHEDULE] section, define by one of the following procedures:

When specifying the day of the week to schedule the download:

If you selected a setting that corresponds to a day of the week (i.e., “SUN” through “SAT”) from the [WEEK] drop-down list, use the [FROM WEEK/TIME] section to specify the start point (day of the week/ time) of the download range, and the [TO TIME] section to specify the end point (time).

3 Specify the destination folder.

The folder and file name of its destination are automatically assigned as shown below, and the path name is displayed in [FOLDER PATH]. You can accept this default destination unless your situation requires another location.

English 64