Sanyo VA-SW8000LITE Configure Authorized Accessible, • All DVRs, DVR Group settings, Options

Initial Set Menu

(Required user access level: ID4)

4

5

Configure [Authorized Accessible		• All DVRs:
DVR Group] settings.			Broadcast is possible to all DVRs.
The DVR groups registered in the
			Broadcast is also sent to the DVR
[Register DVR] window accessible from
the Initial Set menu are listed. Selecting			groups not authorized for access in
			[Authorized Accessible DVR Group]
the check box of a group authorizes
			(step 4).
access to the group.
			You cannot advance to the next step
Configure [Broadcast Range]
			without configuring the [Broadcast
settings.
			Range] settings.
Select the broadcasting range using the
			The [Broadcast Range] settings cannot
radio buttons.
			be configured in the following cases.
Concerning the following notes ( )
			• When the access level of the target
related to the selected option, a
			user is ID1/ID2 (users not
confirmation message is shown in the
			authorized to perform broadcast
dialog box when the relevant button is
			operations).
selected. Confirm the contents and click
			• When the software you are using is
[OK].
Options:			VA-SW8000LITE (not equipped with
			broadcast functions).
• Not allowed:	6 Click [OK].
Broadcast operations are not
permitted.		Saves the DVR access limitation settings
		and closes the dialog box.

•Apply authorized accessible DVRs: Broadcast is only possible to the DVR groups authorized for access in [Authorized Accessible DVR Group] (step 4).

→It is also possible to limit the transmission destination to one group in configuration of [Ranging Broadcast] on the [BROADCAST] window (see P70).

Broadcast is limited depending on the

DVR model and firmware version.

•DSR-M810(P)/M814(P):

Broadcast is only possible when the DVR firmware version is 2.20 or higher.

•DSR-M800(P)/M804(P): Broadcast to these models is not possible.

English 94