Sanyo VA-SW8000LITE 1 2 3, bZoom Mode, Click, on the control panel, from a 4-channelDVR in the

Watching Live Video

bZoom Mode

When you switch to zoom mode, the displayed video can be enlarged centering on a specified point on the view.

This feature works in playback mode as well.

1

2

3

Click	(1) on the control panel.
The button turns red to indicate that you		2	1

are now in zoom-in mode.

Click the center point for zoom-in. Point to and click on the desired point on the view; each time you click the same center point, the displayed video enlarges incrementally.

The zoom factor depends on the current layout.

•When you are viewing the video from a single-channel or 4-channle DVR in the four-view layout: Original size → x2 → x4 → x8 → x12

<Original size>	<X2>
• When you are viewing the video
from a 4-channel DVR in the
single-view layout:
Original size → x2 → x4 → x6

To zoom out on the video after zoom-in:

Click (2) on the control panel. The button turns red to indicate that you are in zoom-out mode.

Each time you click the button, the<X8> <X12> displayed video is scaled down

incrementally until it reverts to the original size.

<X4>

If the specified channel is masked, you cannot use the zoom feature.

4 To revert to the original size:

Click one of the layout selector buttons

() or channel selector buttons on the control panel. Then the viewing pane switches to your selected layout with the zoom factor reset to the original size.

English 34