Sanyo VA-SW8000LITE DVR Management Menu, bSystem Update Window, Specify the new firmware file

DVR Management Menu

(Required user access level: ID4)

b[System Update] Window

You can update the firmware of your specified DVR through the following steps:

1

2

2

Choose a camera (DVR).

From the tree list, select a camera connected to the DVR whose firmware you want to update. The selected camera is highlighted in blue.

Specify the new firmware file.

Click [Browse..] to open a file list. Locate and select the new firmware file, and click the [Open] button.

The [FILENAME] box is populated with your specified file name.

3

4

3

Click .

You are prompted to choose whether to update the firmware. If you click [YES], the system starts updating the firmware.

Wait until the update process completes.

You are presented with a dialog that indicates that the update process is in progress, and a green light flashes.

•The firmware file you plan to broadcast must be stored on your computer’s hard disk before you can broadcast it.

•Do not use any other firmware file than that supplied from SANYO; doing so may possibly damage the DVRs.

•Before you can update the firmware, the DVR(s) must stop any playback or recording session and the DVR Utility Software must display live video.

•The update process takes a few minutes. Do not turn off the power or disconnect your computer from the network while updating is in progress.

English 96