Sanyo VA-SW8000LITE bAlarm Recording Required user access level: ID4, A B C, BALARM DURATION: see

Recording Monitored Video

bAlarm Recording (Required user access level: ID4)

Alarm recording is a feature that automatically records live video when an alarm condition such as an intrusion has been detected.

The alarm detection works in response to the signal inputs from a motion sensor built into a camera or an external device (such as a door switch or infrared sensor).

☞To activate alarm recording:

It is prerequisite that a user with user access level ID4 should configure the trigger condition for alarm recording on the REC MODE SET and TITLE MOTION SET tabs of the [DVR Set] window.

The system automatically starts recording when an alarm condition is detected, and stops recording when a predefined time period elapses. This requires no user intervention.

AALARM MODE: (see P108)

Enables/disables alarm recording.

BALARM DURATION: (see 109)

Determines how long recording should continue when an alarm condition is detected.

CALARM TRIGGER: (see 109)

Set the trigger condition for alarm recording.

DMOTION SENSOR: (see P118)

☞To view alarm-recorded video:

You can play back an alarm-recorded video file the same way as an ordinary recorded video file. In addition, you can use the search feature to specify an alarm event and view the alarm-recorded video associated with the event. For more information, see P45.

Immediately after alarm recording has started or immediately after you have changed DVR’s [PICTURE QUALITY] or [AUDIO RECORDING] setting, the alarm recording mechanism is subject to the following restrictions:

•For up to 4 seconds, it does not accept any alarm input.

•For up to 6 seconds, it does not start recording in response to an alarm input.

Sets the alarm detection condition that should be applied to the camera’s internal motion sensor.

A

B

C

Example of settings on REC MODE SET tab

English 40