Sanyo VA-SW8000 1Selecting a DVR Group, 2Detail list CAMERA TITLE, •Dvr Name, 3Tree list

Initial Set Menu

(Required user access level: ID4)

1Selecting a DVR Group

The drop-down list shows the groups registered via the [Register DVR] window. From the list, select one group you want to edit.

The details of your selected group are listed in the detail list.

2Detail list

•CAMERA TITLE:

The titles of the cameras connected to the DVRs that belong to the group.

At first, the list shows the titles configured on the part of the DVRs or those configured on the TITLE/MOTION SET tab of the [DVR Set] window (for 4-channel models).

When displayed on the tree list, the camera title’s check box is checked.

•DVR NAME:

The titles of the DVRs connected with the cameras.

By default, the list shows the values configured initially when DVRs are registered, or DVR titles configured on the [Register DVR] window.

3Tree list

Cameras belonging to the selected group are displayed as a tree list.

All editing of titles and the tree structure is conducted on the tree.

4Control buttons

• :

Applies and saves your changes.

• :

Before you click [OK], you can cancel your changes by clicking this button.

About the tree list hierarchy

Depending on whether the connected DVRs are single-channel or 4-channel, the tree list represents the camera(s) as follows:

☞When you are connected to a single-channel DVR:

The list displays one camera for one DVR.

☞When you are connected to a 4-channel DVR:

The list displays four cameras for one DVR.

If using commands such as record and playback that are applicable to individual DVRs, executing the command to just one of the four cameras will cause the other three to automatically follow suit.

77English