Sanyo VA-SW8000LITE instruction manual DVR Management Menu, Clock Set Window, Manual

DVR Management Menu

(Required user access level: ID4)

The DVR Management menu, intended for use by an administrative user, provides access to four windows: Clock Set, System Update, DVR Info, and DVR Set. The [DVR Set] window has seven tabs, through which you can fine-tune the DVR operating conditions.

On the menu bar, click [DVR Management] to open the pull-down menu, and navigate to one of the windows by clicking the corresponding option.

The DVR Management menu lets you select a camera from the tree list. Settings configured on each window are uploaded to the DVR connected with your selected camera.

b[Clock Set] Window

You can set the internal clock of your specified DVR through the following steps:

1

2

Choose a camera (DVR).

From the tree list, select a camera connected to the DVR whose internal clock you want to set. The selected camera is highlighted in blue.

Choose from two setting modes.

Choose one of the two setting modes by clicking the corresponding radio button.

•AUTO (default):

In this mode, the DVR is automatically synchronized to your computer's internal clock.

•MANUAL:

In this mode, you manually set the DVR's internal clock.

3	If you have selected “MANUAL”, set
	the date and time manually.

Use the spin buttons to set the date and time.

•The date can be configured within the range of January 1, 2002 to December 31, 2036.

•The actual date format is determined by the corresponding Windows settings.

4 Click .

The DVR’s clock is adjusted based on the mode you selected.

•To instruct all the connected DVRs

to simultaneously adjust their internal clocks, use the broadcast feature available from the Tool menu. For more information, see P70.

•To synchronize all connected DVRs to your computer’s internal clock at regular intervals, open the [Options] window from the Initial Set menu, and configure the [AUTO CLOCK ADJUST TIME] settings. For more information, see P74.

95English