Sanyo VA-SW8000 <Buzzer>, 5ALARM ON default: ON, 6DISK FULL default: ON, 7KEY IN default: OFF

DVR Management Menu

(Required user access level: ID4)

<BUZZER>

Specify which conditions should trigger the warning buzzer by selecting either the “ON” or “OFF” radio button for each condition.

5ALARM ON (default: ON)

When an alarm condition is detected.

6DISK FULL (default: ON)

When the hard disk runs out of free space. (This takes effect only when [OVERWRITE] is set to “OFF”.)

7KEY IN (default: OFF)

When a button on the DVR’s front panel is pressed.

8WARNING (default: ON)

When any of the following has occurred:

•Hard disk failure

•Fan failure

•Recording error

•VIDEO LOSS

9NON REC (default: OFF)

When an ongoing recording session is stopped.

When the DVR’s buzzer has sounded, you can stop the buzzer by pressing any button on the front panel.

When you have finished configuring the

settings on this tab, click and make sure that the tab index text turns yellow.

When you have finished your configuration task across all the tabs,

finally click . Configuration information is uploaded to the DVR, and the tab index text returns from yellow to black. (For more information on the command buttons, see P103.)

115English