Sanyo VA-SW8000 6ALARM DURATION default: 20S, 7ALARM TRIGGER default: ALARM, •Alarm Or Sensor

DVR Management Menu

(Required user access level: ID4)

6ALARM DURATION (default: 20S)

You can specify the duration of alarm recording triggered when an alarm condition is detected.

For example, if the duration is set to “5S”, alarm video is recorded for 5 seconds after an alarm signal is received.

Available options:

5S, 10S, 20S, 40S, 1M, 2M, 3M, 4M, 5M, 10M, 15M, CC

If you select “CC”, the alarm recording mechanism continuously works as long as the alarm signal is being received.

The alarm recording mechanism works for at least 5 seconds in response to one alarm signal even if the alarm signal goes off instantly.

7ALARM TRIGGER (default: ALARM)

You can configure the alarm recording trigger condition (i.e., when the alarm recording mechanism is activated).

Available options:

•ALARM (external alarm):

When the external alarm device has input an alarm signal to the alarm input terminal on the DVR’s rear panel.

•SENSOR (motion sensor):

When the motion sensor has detected something moving in the video.

•ALARM OR SENSOR:

When either the external alarm device or the motion sensor has reacted.

•ALARM AND SENSOR:

When both the external alarm device and the motion sensor have reacted.

109English

8VIDEO LOSS (default: ON)

You can control how the system should respond to loss of the monitor video stream.

Available options:

•ON:

When a video stream is lost, the system displays a “VIDEO LOSS” message on screen, and outputs the corresponding signal to the DVR’s rear panel terminal.

•OFF:

The system neither displays a message nor outputs a signal when a video stream is lost.

9AUTO DELETE (default: OFF)

You can turn on or off the Auto Delete feature, which automatically erases obsolete video files that have exceeded a predetermined maximum storage period.

Available options:

•ON:

Turns on the Auto Delete feature.

(You have to specify the maximum storage period within the range of 1 to 99 days.)

•OFF:

Turns off the Auto Delete feature.

The AUTO DELETE section is displayed on the window only when the DVR is the DSR-M810/814 complete with the Auto Delete feature. However, some earlier versions of the DSR-810 do not have this feature built in. For details, consult your dealer.

When you have finished configuring the

settings on this tab, click and make sure that the tab index text turns yellow. When you have finished your configuration task across all the tabs, finally click

. Configuration information is

uploaded to the DVR, and the tab index text returns from yellow to black. (For more information on the command buttons, see P103.)