Sanyo VA-SW8000 <MONITOR SET> 1SEQUENCE Default, <ALARM MONITOR SET> 2DISPLAY default: QUAD

DVR Management Menu

(Required user access level: ID4)

<MONITOR SET>

1SEQUENCE (Default: 1)

Specify the interval at which to switch from one camera to another in Sequential Switching mode.

Valid range: 1 to 30 (seconds)

<ALARM MONITOR SET>

2DISPLAY (default: QUAD)

Specify which layout to use when an alarm has occurred.

Available options:

•FULL:

Uses the single-view layout to display the video from the channel where the alarm occurred.

•QUAD:

Uses the four-view layout to display the video from all the four channels, including the channel where the alarm occurred.

3ALARM PRIORITY (default: LAST)

When you select FULL from DISPLAY (2), the DVR’s user interface can display only channel at a time but, during an alarm recording, another alarm may occur in a different channel. To handle such situations, you can select one of the following options.

•LAST:

Displays the most recent alarm video instead of the view that is being recorded.

•FIRST:

Continues to display the video that is being recorded.

•SWITCH:

Switches the alarm video streams at intervals of one second.

117English

<MASK SET>

4MASK SET (default: OFF)

When it is critical to ensure the privacy and confidentiality of the video from a particular channel, you can mask that channel to prevent the video from viewed on the monitoring and playback screens.

Available options:

•ON: The system masks the video and sound, and a black placeholder labeled as “MASK” appears.

•OFF: The video is displayed as usual.

When you have finished configuring the

settings on this tab, click and make sure that the tab index text turns yellow.

When you have finished your configuration task across all the tabs,

finally click . Configuration information is uploaded to the DVR, and the tab index text returns from yellow to black. (For more information on the command buttons, see P103.)