Sanyo VA-SW8000 Deregistering a DVR, Using a Registration List in an Updated Version, 4Click OK

Initial Set Menu

(Required user access level: ID4)

☞Using a Registration List in an Updated Version

If you have updated the DVR Utility Software from VA-SW800/804/814 to VA-SW8000, you can configure the system to use the registration list created in the previous version. To do so, use the [Register DVR] window and follow these steps:

1Install VA-SW8000.

During the installation process, you are prompted to choose whether to remove the old version’s software files; if you click YES, the files are automatically removed.

2On the [Register DVR] window, select “MANUAL” from [TCP/IP ADDR].

3Click the [Create List] button.

After a while, the DVR Utility Software retrieves currently registered information from the DVR and displays it.

4Click [OK].

The list is registered, and the registration information is uploaded to the DVR.

Deregistering a DVR

To deregister a DVR, follow these steps:

1 Choose a DVR.

On the tree list or registration list, select the DVR you want to deregister. The selected DVR is highlighted in blue.

2 Remove the connecting cable.

Remove the connecting cable from the DVR. When you attempt to deregister a DVR while it is still connected to the network, an error results.

3 Click .

You are prompted to choose whether to proceed. Click [Yes] if you are sure to deregister the DVR.

Your specified DVR is deregistered, and removed from the tree list and registration list.

85English