Sanyo VA-SW8000LITE instruction manual IP Addr MAC Addr

Initial Set Menu

(Required user access level: ID4)

1IP address configuration mode selector

2Group name section

3DVR title section

4DVR tree list

This tree list displays group nodes (folders) and DVRs that belong to each group.

When you change or delete the registration information of a DVR, you can use the tree list to select the DVR or group.

5DVR registration list

This list displays the information on the DVRs that belong to a group selected in the tree list.

You can also use the registration list to select the DVR(s) whose registration information you want to change or delete.

•DVR NAME

•TYPE (model)

•IP ADDR.

•MAC ADDR.

6Up/down buttons

You can move up or down a group or DVR in the list by selecting the group or DVR and then clicking this button.

Alternatively, you can select a DVR or group on the tree list and drag and drop it to a new position.

7Command buttons

• :

Saves your change, and updates the DVRs with the new settings.

If a group contains no cameras, it will be automatically deleted from the tree list when [OK] is clicked for that group.

•Following deletion, a confirmation message will appear.

•The initially configured “WORKGROUP” cannot be deleted.

Clicking [OK] will bring up the following dialog.

Select whether or not to reflect the contents configured in the [Register DVR] window on the user screen tree list.

•Yes:

The current tree list is deleted, and a new tree list reflecting the new settings is displayed.

•No:

The configured contents are stored, however, the tree list display remains the same.

• :

Before you click [OK], you can cancel your changes by clicking this button.

• :

Remove the registration information of DVRs or groups.

English 82