Sanyo VA-SW8000LITE bBroadcast, 1 2 3 4 5 6, 1Ranging Broadcast, Using the Tool Menu Options

Using the Tool Menu Options

bBroadcast

The Broadcast window contains five commands and allows you to broadcast the commands to all of the connected DVRs without having to specify individual DVRs as targets.

When broadcasting a command, the system polls the connected DVRs at one-minute intervals; however, if any DVR fails to respond within 3 minutes, the system assumes that the DVR is not operating for some reason and displays a communication error message.

1

2

3

4

5

6

1Ranging Broadcast

When [Broadcast Range] is set to “Apply authorized accessible DVRs” in configuration of limit accessible DVRs in the [User ID] window, accessible broadcast ranges are listed on pull-down menu, so the following options are available

(see P94):

•When “All authorized accessible DVRs” is selected:

Broadcast is possible to all DVR groups authorized for access.

•When a DVR group is selected: Transmission is limited to only one selected group.

2RECORD

(required user access level: ID3/4)

Broadcasts the Record (manual recording) command, equivalent to one that can be executed by clicking the Record button on the control panel.

You can instruct all the DVRs to simultaneously start or stop recording

video data by clicking (Start

Recording) or (Stop Recording).

3TIMER RECORD

(required user access level: ID3/4)

Broadcasts the Timer Recording command, equivalent to one that can be executed by clicking the Timer Recording ( ) button on the control panel.

Also, you can click or to have all the DVRs simultaneously turn on/off their timer recording mechanisms.

English 70