Sanyo VA-SW8000 Choose a user, Change the registration information, Initial Set Menu, Click

Initial Set Menu

(Required user access level: ID4)

Changing the Registration Information of an Existing User

You can change the user ID, password, or user access level of an existing user. To do so, follow these steps:

2

3

1 Choose a user.

On the user registration list, select the user whose information you want to change. The selected user is highlighted in blue, and the user’s registration information appears.

2 Change the registration information.

Change the user ID, password, and/or user access level through the same steps you follow when registering a new user.

3 Click .

When you change the user ID and/or user access level but not the password, the user registration list is immediately updated to reflect your changes.

If you change the password, you are prompted to confirm the password by reentering it. In this case, proceed to step 4.

1

4 Enter the current and new passwords.

On the dialog, enter the currently defined password into the [CURRENT] box, and reenter the new password to the [NEW] box. The password entered into the [NEW] box must be identical to the one you specified in step 2.

If your entered current and new passwords are correct, the registration process is completed, and the user registration list is updated to reflect your changes.

An error message appears if your reentered password does not match the one you specified. If this is the case, reenter the correct password.

91English