Getting into the configuration menu
Note:
In order to get into the configuration menu, the transmitter or receiver must be switched off.
Press the SET button | and keep it pressed. | |
Press the ON/OFF button | and keep it pressed for approx. five | |
seconds. “SETUP” appears on the display. | ||
Press the SET button | to get into the configuration menu. | |
Selecting a menu
Press the / rocker button (UP/DOWN) to select a menu.
Press the SET button to get into the setting mode of the selected menu. The current setting that can be adjusted flashes on the display.
Adjusting a setting
Press the / rocker button (UP/DOWN) to adjust the setting.
By briefly pressing the / rocker button, the display jumps either forwards or backwards to the next setting. In the “FADE”, “TUNE“, “NAME“ and “ACCESS” menu, the / rocker button features a “fast search” function: If you hold down the or button, the display cycles continuously, allowing you to get fast and easily to your desired setting. The new setting flashes on the display until it is stored.
88
