Storing a setting
Press the SET button to store the setting. “STORED” appears on the dis- play, indicating that the setting has been stored. The display then returns to the top menu level.
With most menus, new settings become effective immediately without having to be stored. An exception are the “RESET” menus of both transmitter and receiver and the “TUNE” menu of the trans- mitter. With these menus, new settings only become effective after they have been stored.
Exiting the configuration menu
When in the configuration menu, briefly pressing the ON/OFF button will cancel your entry (ESC function) and return you to the “SETUP” display without storing the setting.
Overview of menus
Display | Receiver | Transmitter |
|
|
|
SETUP | Standard display in the configuration | Standard display in the configuration |
| menu | menu |
|
|
|
INT.MIC | Switching the internal microphone | – |
| on/off |
|
|
|
|
FADE | Adjusting the gain reduction of the | – |
| automatic priority circuit |
|
|
|
|
SQELCH | Adjusting the squelch threshold | – |
|
|
|
ACCESS | Releasing channels for the user | Releasing channels for the user |
|
|
|
TUNE | Setting a frequency for a selected | Setting a frequency for a selected |
| channel in the channel bank “U” (user | channel in the channel bank “U” (user |
| bank) | bank) |
|
|
|
NAME | Entering a name | Entering a name |
|
|
|
RESET | Resetting the unit to the factory- | Resetting the unit to the factory- |
| preset default settings | preset default settings |
|
|
|
89
