Connector assignment, SK 2015 transmitter | Sennheiser manual

SK 2015 transmitter

RF output power at 50 Ω		typ. 10 mW
RF radiating power		typ. 1 mW
Spurious emission		< 4 nW
Max. input voltage		Microphone: 200 mV/5 kΩ (soft limiter threshold)
(peak deviation/input impedance)		Line: 3 V/47 kΩ
Nominal voltage		2.4 V
Power consumption at nominal		≤ 120 mA
voltage
Power supply		BA 2015 battery pack, 2.4 V
		or AA size batteries, 1.5 V
Operating time	with BA 2015	typ. 12 h
	battery pack
	with batteries	typ. 12 h
Dimensions (H x W x D)		3.2 x 2.5 x 0.9 inches (without antenna)
Weight (with BA 2015 battery pack)		approx. 0.38 lbs.
Temperature range		–10 °C to +55 °C

Connector assignment

SK 2015:

3.5mm stereo jack plug, unbalanced

EK 2015:

3.5mm stereo jack plug, unbalanced

SK 2015:

2.5 mm mono jack plug

EK 2015:

2.5mm stereo jack plug, unbalanced

102

Image 50

Sennheiser manual Connector assignment, SK 2015 transmitter, Mm stereo jack plug, unbalanced Mm mono jack plug 102

Contents

Mikroport System 157 Bedienungsanleitung105 209 Mikroport System Safety instructions Contents Warranty regulations 102 2015 Mikroport System Operating principle of the 2015 Mikroport System 2015 EZB Transport case Transport holding device EZG Delivery includesMKE Operating controls of the EK 2015 receiver Indications and displays on the receiver Battery status indicationAudio signal indication Alphanumeric display Display for microphone level internal microphone Display for lock modeDisplay for the audio level Display for the RF level Operating controls of the SK 2015 transmitter Mute indication Red LED flashing Battery pack or the batteriesIndications and displays on the transmitter Audio peak indication Display for line level Display for microphone level Transport case Transport holding device Preparing the units for useTransporting the transmitter and receiver Connecting the microphones to the transmitter Connecting sound sources to the transmitterHow to properly use the battery pack or the batteries Attaching and positioning the microphones MKE ME 2015-H Connecting the headphones Connecting the receiver to hearing aids or headphonesConnecting audio sources to the transmitter Attaching the transmitter or receiver to clothing Wearing the transmitter or receiver around your neck Activating/deactivating the lock mode Using the receiverSwitching the receiver on/off Switching the channel Adjusting the level of the received audio signalAdjusting the level of the internal microphone Displaying the frequency Operating menu of the EK 2015 receiver MIC Muting the microphone Using the transmitterSwitching the transmitter on/off Activating/deactivating the lock mode Working with the transmitter’s operating menu Function of the buttons Selecting a menu Adjusting a settingGetting into the operating menu Press the / rocker button UP/DOWN to select a menu Exiting the operating menu Storing a settingOverview of menus Operating menu of the SK 2015 transmitter Operating menu Adjusting the sensitivity of the line input Adjustment tips for the operating menu of the transmitterAdjusting the microphone sensitivity Tion-free Switching between the channelsNel that is released on all receivers Troubleshooting Error checklist Recommendations and tips For the MKE 2015-0 plug-on microphone optional accessoryFor the ME 2015-H headset microphone optional accessory For system planning For multi-channel operation Care and maintenanceFor optimum reception Configuration of the units by the technical expert Working with the configuration menu Getting into the configuration menu Exiting the configuration menu Structure of the configuration menu of the EK 2015 receiver Reset Access Reset Adjusting the squelch threshold receiver only Adjustment tips for the configuration menuSwitching the internal microphone on or off receiver only Receiver only Releasing channels for the user Play Press the SET button and the button UP simultaneouslyThen displays the next channel that can be released Mitter and receiver Resetting the unit to the factory-preset default settings Entering a name Close the battery compartment Colored battery doors and face platesChanging the battery compartment cover Changing the face plate receiver only Range B Additional informationChannel bank system Range C You can hear the difference HDX noise reduction systemRF link Inherent Noise of the RF link Transmitter Specifications Mikroport System EK 2015 receiver OFF Mm stereo jack plug, unbalanced Mm mono jack plug 102 Connector assignmentSK 2015 transmitter System variants and accessories NT 3-US 104 Garantiebestimmungen Conditions de garantie Garanzia prodotti Declaración de garantia Page FCC DMOB2AUWG Observación BemerkungNota OpmerkingPage