Transport case
Transport holding device
Preparing the units for use
Transmitter and receiver have been adapted by your technical expert to suit your individual applications.
Transporting the transmitter and receiver
In addition to the EZB 2015 system case offering room to store all compo- nents of the system, delivery also includes a transport case. This is suitable for the
Push the transmitter and the receiver into the transport holding device as shown on the left. The units fit snugly in the case preventing damage dur- ing transport. It is possible to store the battery packs in the front pocket of the transport case, as well as in the transport holding device.
Inserting the battery pack/batteries (transmitter and receiver)
For powering the units, we recommend using the supplied BA 2015 battery pack. The battery pack can be recharged in the L 2015 charger while remaining in the transmitter or receiver (see operating manual of the charger). If no power supply is available for recharging the battery pack, you can alternatively use 1.5 V AA size batteries.
Press the two unlocking buttons and open the battery compartment cover .
Insert the battery pack or the batteries as shown on the left. Please observe correct polarity when inserting the battery pack or the batte- ries.
Close the battery compartment. The battery compartment cover locks into place with an audible click.
67
