9.Check the Configuration display.
The new network configuration is displayed with the addition of the iSCSI network.
You should now be able to ping the HP 3PAR StoreServ Storage ports that were previously defined from the COS.
Configuring the VMware iSCSI Initiator
The following steps show how to configure the VMware iSCSI initiator.
1.With the Configuration tab selected, click the Security Profile→Firewall Properties option from the Software menu box.
2.Open up the ports that will be used for the iSCSI connection, then click OK.
3.The iSCSI software initiator needs to be enabled before the ESX host can use it. Click the Storage Adapters option in the Hardware menu box.
