SATP Custom Rules and Associated Defined Parameters
To list SATP custom rules and associated defined parameters, issue the following commands:
ESXi 5.x example
For persona 11:
For persona 6:
ESX/ESXi 4.x example
#esxcli nmp satp listrules grep -i 3par
VMW_SATP_ALUA | 3PARdata | VV |
tpgs_on | HP 3PAR Custom | iSCSI/FC/FCoE ALUA Rule |
Show Device Information
To show device information, issue the following commands:
ESXi 5.x example
#esxcli storage nmp device list naa.50002ac0000a0124
Device Display Name: 3PARdata iSCSI Disk (naa.50002ac0000a0124)
Storage Array Type: VMW_SATP_ALUA
Storage Array Type Device Config: {implicit_support=on;explicit_support=on; explicit_allow=on;alua_followover=on;{TPG_id=256,TPG_state=AO}}
Path Selection Policy: VMW_PSP_RR Path Selection Policy Device Config:
{policy=rr,iops=100,bytes=10485760,useANO=0;lastPathIndex=1:
NumIOsPending=0,numBytesPending=0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba3:C0:T1:L73, vmhba2:C0:T0:L73, vmhba2:C0:T1:L73, vmhba3:C0:T0:L73
