HP QR516B manual Turn off the iSCSI ports, # controlport offline Showport

NOTE: If changing the config from iSCSI to FCoE, follow the steps below.

1.Issue the showportcommand.

#showport

0:3:1	target	ready	-	000E1E05BEE6	iscsi	iSCSI	-	-	-
0:3:2	target	ready	-	000E1E05BEE2	iscsi	iSCSI	-	-	-

2.Turn off the iSCSI ports:

#controlport offline 0:3:1

#controlport offline 0:3:2

showport

0:3:1 target offline - 000E1E05BEE2 iscsi iSCSI0:3:2 target offline - 000E1E05BEE2 iscsi iSCSI

3.Change the topology to FCoE:

#controlport config fcoe 0:3:1

#controlport config fcoe 0:3:2

controlport rst 0:3:1 controlport rst 0:3:2

0:3:1 target offline - 000E1E05BEE2 iscsi iSCSI0:3:2 target offline - 000E1E05BEE2 iscsi iSCSI

showport

0:3:1	target	ready 2FF70002AC000121	20310002AC000121	host	FCoE
-	-	-
0:3:2	target	ready 2FF70002AC000121	20320002AC000121	free	FCoE
-	-	-

4.Check the current settings of the FCoE ports by issuing showport -fcoe. For example:

#showport -fcoe

N:S:P ENode_MAC_Address PFC_Mask

0:3:1	00-02-AC-07-01-21	0x08
0:3:2	00-02-AC-06-01-21	0x00

32 Configuring the HP 3PAR StoreServ Storage for FCoE