Linksys AG041 manual Appendix a Troubleshooting, Common Problems and Solutions

Page 46

ADSL Gateway with 4-Port Switch

Appendix A: Troubleshooting

This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” Provided are possible solutions to problems that may occur during the installation and operation of the Gateway. Read the descriptions below to help you solve your problems. If you can’t find an answer here, check the Linksys website at www.linksys.com.

Common Problems and Solutions

1.I need to set a static IP address on a computer.

You can assign a static IP address to a computer by performing the following steps:

For Windows 98 and Me:

1.Click Start, Settings, and Control Panel. Double-click Network.

2.In The following network components are installed box, select the TCP/IP-> associated with your Ethernet Adapter. If you only have one Ethernet Adapter installed, you will only see one TCP/IP line with no association to an Ethernet Adapter. Highlight it and click the Properties button.

3.In the TCP/IP properties window, select the IP address tab, and select Specify an IP address. Enter a unique IP address that is not used by any other computer on the network connected to the Gateway. Make sure that each IP address is unique for each computer or network device.

4.Click the Gateway tab, and in the New Gateway prompt, enter 192.168.1.1, which is the default IP address of the Gateway. Click the Add button to accept the entry.

5.Click the DNS tab, and make sure the DNS Enabled option is selected. Enter the Host and Domain names (e.g., John for Host and home for Domain). Enter the DNS entry provided by your ISP. If your ISP has not provided the DNS IP address, contact your ISP to get that information or go to its website for the information.

6.Click the OK button in the TCP/IP properties window, and click Close or the OK button for the Network window.

7.Restart the computer when asked.

For Windows 2000:

1.Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections.

2.Right-click the Local Area Connection that is associated with the Ethernet Adapter you are using, and select the Properties option.

3.In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and click the Properties button. Select Use the following IP address option.

4.Enter a unique IP address that is not used by any other computer on the network connected to the Gateway.

5.Enter the Subnet Mask, 255.255.255.0.

6.Enter the Default Gateway, 192.168.1.1 (Gateway’s default IP address).

Appendix A: Troubleshooting

39

Common Problems and Solutions

Image 46
Contents Adsl Gateway Copyright and Trademarks How to Use this GuideWord definition Table of Contents Adsl Gateway with 4-Port Switch List of Figures A Network with the Gateway23 Applications & Gaming Port Triggering Figure B-23 New Preshared Key Introduction WelcomeWhat’s in this Guide? Adsl Gateway with 4-Port Switch IP Addresses Planning your NetworkGateway’s Functions What’s an IP Address?Dynamic IP Addresses What is a VPN?Dhcp Dynamic Host Configuration Protocol Servers Encryption encoding data transmitted in a networkWhy do I need a VPN? VPN Gateway to VPN GatewayVPN Gateway-to-VPN Gateway Getting to Know the Adsl Gateway Back PanelFront Panel DSLISP a company that provides access to the Internet Connecting the Adsl GatewayConnecting to a Computer OverviewConnect power Access Restrictions Configuring the Adsl GatewaySetup SecurityApplications & Gaming How to Access the Web-based UtilityAdministration StatusBasic Setup Setup TabInternet Setup RFC 1483 Bridged Dynamic IP Static IPRFC 1483 Routed RFC 2516 PPPoEBridged Mode Only RFC 2364 PPPoAOptional Settings Required by some ISPs Network SetupDdns DynDNS.orgAdvanced Routing Advanced RoutingStatic Routing 12 Routing Table Security Tab FirewallVPN Software instructions for the computer15 VPN with Manual Key Management Advanced VPN Tunnel Setup PhaseConfiguring the Adsl Gateway Security Tab Access Restrictions Tab Internet Access19 List of PCs Applications and Gaming Tab Single Port ForwardingPort Range Forwarding Port TriggeringDMZ Gateway Access Administration TabManagement UPnP Email Alerts ReportingLog Smtp the standard e-mail protocol on the InternetFactory Defaults DiagnosticsPing Test Ping Test Parameters Firmware Upgrade 29 Administration tab Firmware UpgradeGateway Information Status TabGateway Internet ConnectionsLocal Network DSL ConnectionCommon Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a computer Want to test my Internet connection Open a command prompt. For Windows 98 and Me Adsl Gateway with 4-Port Switch TCP UDP VPN Ipsec Can’t get the Internet game, server, or application to workNeed to upgrade the firmware To start over, I need to set the Gateway to factory defaultFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnecting Where is the Gateway installed on the network? Frequently Asked QuestionsPower LED flashes continuously Is IPSec Passthrough supported by the Gateway?What is Network Address Translation and what is it used for? Does the Gateway support ICQ send file?What is DMZ Hosting? How do I reset the Gateway? What are the advanced features of the Gateway?What is a MAC Address? Is the Gateway cross-platform compatible?Introduction EnvironmentBuild Filter Lists How to Establish a Secure IPSec TunnelCreate an IPSec Policy Filter List 1 win-RouterFilter List 2 Router -win Figure B-4 IP Filter LIstFigure B-7 IP Filter List Configure Individual Tunnel Rules Tunnel 1 win-RouterFigure B-13 Authentication Methods Figure B-16 Tunnel Setting Tab Tunnel 2 Router-winFigure B-19 IP Filter List Tab Figure B-22 Preshared Key Assign New IPSec Policy Figure B-25 Connection TypeCreate a Tunnel Through the Web-Based Utility Figure B-28 VPN TabFigure C-1 IP Configuration Screen Windows 98 or Me InstructionsWindows 2000 or XP Instructions Figure C-3 MAC Address/Physical AddressFigure D-1 Upgrade Firmware Appendix D Upgrading FirmwareShared Resources Appendix E Windows HelpNetwork Neighborhood/My Network Places Appendix F Glossary Adsl Gateway with 4-Port Switch Adsl Gateway with 4-Port Switch Adsl Gateway with 4-Port Switch Appendix G Specifications StandardsAppendix H Warranty Information Limited WarrantyAppendix I Regulatory Information FCC StatementEurope Mail Address Appendix J Contact InformationOutside of Europe Mail Address