ADSL Gateway with 4-Port Switch
7.Select the Tunnel Setting tab and click The tunnel endpoint is specified by this IP Address radio button. Then, enter the Router’s WAN IP Address.
8.Select the Connection Type tab and click All network connections. Then, click the OK or Close button to finish this rule.
Tunnel 2: Router->win
9.In the new policy’s properties screen, make sure that “win
Appendix B: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
Figure B-16: Tunnel Setting Tab
Figure B-17: Connection Type Tab
Figure B-18: Properties Screen
57
How to Establish a Secure IPSec Tunnel