FCC Statement, FCC Radiation Exposure Statement

Appendix D

Regulatory Information

Appendix D: Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•• Reorient or relocate the receiving antenna

•• Increase the separation between the equipment or devices

•• Connect the equipment to an outlet other than the receiver’s

•• Consult a dealer or an experienced radio/TV technician for assistance

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11.

Safety Notices

•• Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.

•• Do not use this product near water, for example, in a wet basement or near a swimming pool.

•• Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

WARNING: This product contains lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003 and RSS210.

Operation is subject to the following two conditions:

1.This device may not cause interference and

2.This device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed to operate with an antenna having a maximum gain of 2dBi. Antenna havingahighergainisstrictlyprohibitedperregulations of Industry Canada. The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful communication.

Industry Canada Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Gigabit ExpressCard Adapter

EC1000 specifications

The Linksys EC1000 is a high-performance Ethernet switch designed to enhance networking capabilities for both home and small office environments. With its robust features and advanced technology, the EC1000 aims to provide reliable connectivity and efficient data transfer across devices.

One of the standout features of the EC1000 is its ability to support Gigabit Ethernet, which allows for data transfer speeds of up to 1000 Mbps. This means that users can experience seamless streaming, fast file transfers, and smooth online gaming without annoying lags. The switch typically comes with multiple ports, often up to 8 or more, providing ample connectivity options for various devices, such as computers, printers, and smart TVs.

The Linksys EC1000 is equipped with auto-sensing capabilities, which enable it to detect the speed of connected devices and adjust accordingly. This ensures optimized performance for each connected device, eliminating potential bottlenecks and allowing for efficient bandwidth utilization. This plug-and-play design makes setting up the switch effortless, as no additional configuration is necessary.

In terms of build quality and design, the EC1000 features a compact and durable casing that can be easily placed on a desk or mounted in a network rack. Its fanless design ensures silent operation, making it an ideal choice for noise-sensitive environments.

The EC1000 also incorporates advanced technologies such as IEEE 802.3x flow control, which minimizes packet loss during data transmission, ensuring a stable connection. Additionally, it supports VLAN (Virtual Local Area Network) configurations, allowing users to segment network traffic for improved security and performance.

With its combination of performance, ease of use, and advanced networking features, the Linksys EC1000 is an excellent choice for those looking to upgrade their networking infrastructure. Whether for a home office or a small business, this Ethernet switch provides the necessary tools to ensure fast, reliable, and efficient connectivity across multiple devices. Perfect for users demanding high-performance networking, the EC1000 stands out as a valuable addition to any network setup.