Linksys ADSL2MUE manual Diagnostics, Factory Default

Page 24

ADSL2 Modem with USB and Ethernet

Diagnostics

Ping Test. This feature is used to find out if an IP Address is operating and available to receive and respond to traffic.

•Ping Target IP. Enter the IP Address that you want to ping in the field. This can be either a local (LAN) IP or an Internet (WAN) IP address.

•Ping Size. Enter the size of the ping packets.

•Number of Pings. Enter the number of times that you want to ping.

Click the Start Test button to start the Ping Test. Click the Clear button to remove the results from the screen.

Factory Default

Restore Factory Defaults. If you wish to restore the Modem to its factory default settings and lose all your settings, click Yes.

To begin the restore process, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.

Chapter 5: Configuring the ADSL2 Modem

Figure 5-10: Ping Test

IMPORTANT: Restoring the ADSL2 Modem's factory default settings will erase all of your settings and replace them with the factory defaults. Do not reset the ADSL2 Modem if you want to retain the settings.

Figure 5-11: Restore Factory Default

18

Diagnostics

Page 23 Page 25
Image 24
Page 23 Page 25
Contents ADSL2 Modem How to Use this Guide Copyright and TrademarksWord definition Table of Contents ADSL2MUE Modem with USB and Ethernet Back Panel Front PanelPPPoA Introduction WelcomeWhat’s in this Guide? Introduction What’s in this Guide? Getting to Know the ADSL2 Modem USBDSL Connecting the ADSL2 Modem Connecting the Modem using an Ethernet ConnectionOverview Connecting the Modem using a USB Connection USB ConnectionInstalling the USB Driver Windows XPWindows 2000 Search Select CD-ROM drives, and click NextOn the Driver Files Search Results screen, click Next 2000 Search ResultsWindows Millennium Me Locating Software12 98 Search 16 98 Install Best Driver Installation is complete Configuring the ADSL2 Modem Setup Tab Basic SetupInternet Setup RFC 1483 Bridged Dynamic IP RFC 2516 PPPoE Bridged Mode Only Administration Tab Security Modem PasswordDiagnostics Factory DefaultStatus Tab Firmware Upgrade Status Tab ModemStatus Tab Local Network 14 Local NetworkAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a computer ADSL2MUE Modem with USB and Ethernet To start over, I need to set the Modem to factory default Need to upgrade the firmwareMy DSL service’s PPPoE is always disconnecting Frequently Asked Questions Power LED flashes continuouslyWhere is the Modem installed on the network? Is IPSec Passthrough supported by the Modem?Is the Modem cross-platform compatible? Can the Modem act as my Dhcp server?ADSL2MUE Modem with USB and Ethernet Figure B-1 Upgrade Firmware Appendix B Upgrading FirmwareAppendix C Glossary ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet Appendix D Specifications Appendix E Warranty Information WarrantyAppendix F Regulatory Information FCC StatementSafety Notices EC Declaration of Conformity European Community Appendix G Contact Information Europe Mail AddressOutside of Europe Mail Address

ADSL2MUE specifications

The Linksys ADSL2MUE is a versatile and robust ADSL modem that caters to both home and small business needs. It is designed to provide a reliable high-speed internet connection over a standard telephone line, making it an essential device for users in areas where cable or fiber connections are not available. This modem is equipped with advanced capabilities to effectively support ADSL2 and ADSL2+ technologies, which significantly enhance the performance and quality of internet connections.

One of the standout features of the Linksys ADSL2MUE is its ability to achieve downstream speeds of up to 24 Mbps and upstream speeds of up to 1 Mbps, which allows for a seamless online experience. The modem operates efficiently on both ADSL and ADSL2+ lines, adapting to available bandwidth conditions to optimize performance. This versatility makes it a suitable option for a variety of applications, including streaming, gaming, and video conferencing.

The device utilizes a built-in Ethernet port that enables easy connection to a router or switch, facilitating the sharing of internet access among multiple devices within a network. This feature is particularly important in today’s connected world, where numerous devices often rely on a single internet source. Additionally, the Linksys ADSL2MUE supports Network Address Translation (NAT), which enhances security by allowing multiple devices to share a single public IP address.

When it comes to installation and configuration, the ADSL2MUE is designed for convenience. The process is simple and can be achieved through a web-based interface, which provides users with an intuitive means of managing settings and monitoring connection status. The modem also includes a built-in firewall that further secures the network against external threats.

In terms of build and design, the Linksys ADSL2MUE is compact and lightweight, making it easy to fit into various setups without consuming excessive space. This design is in line with Linksys's reputation for creating user-friendly and aesthetically pleasing networking equipment.

Overall, the Linksys ADSL2MUE modem stands out for its advanced ADSL technologies, high-speed internet capabilities, ease of installation, and robust security features, making it a reliable choice for users seeking a dependable internet connection in a variety of environments. Its balanced features and practical design ensure that it meets the demands of modern internet usage effectively.
Top Page Image Contents