Linksys ADSL2MUE manual Frequently Asked Questions, Power LED flashes continuously

Page 30

ADSL2MUE Modem with USB and Ethernet

7.The Power LED flashes continuously.

The Power LED lights up when the device is first powered up. In the meantime, the system will boot up itself and check for proper operation. After finishing the checking procedure, the LED remains steady to show that the system is working fine. If the LED continues to flash after this time, the device is not working properly. Try to flash the firmware by assigning a static IP address to the computer, and then upgrade the firmware. Try using the following settings, IP Address: 192.168.1.50 and Subnet Mask: 255.255.255.0.

8.When I enter a URL or IP address, I get a time-out error or am prompted to retry.

Check if other computers work. If they do, ensure that your computer’s IP settings are correct (IP Address, Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem.

If the computers are configured correctly, but still not working, check the Modem. Ensure that it is connected and powered on. Connect to it and check its settings. (If you cannot connect to it, check the LAN and power connections.)

Manually configure the TCP/IP settings with a DNS address provided by your ISP.

Make sure that your browser is set to connect directly and that any dial-up is disabled. For Internet Explorer, click Tools, Internet Options, and then the Connection tab. Make sure that Internet Explorer is set to Never dial a connection. For Netscape Navigator, click Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to Direct connection to the Internet.

Frequently Asked Questions

What is the maximum number of IP addresses that the Modem will support?

The Modem will support up to 253 IP addresses.

Is IPSec Passthrough supported by the Modem?

Yes, it is a built-in feature that is enabed by default.

Where is the Modem installed on the network?

The Modem is installed between the ADSL wall jack and the LAN.

Does the Modem support IPX or AppleTalk?

No. TCP/IP is the only protocol standard for the Internet and has become the global standard for communications. IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk, a communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but those protocols cannot connect from the Internet to a LAN.

Does the LAN connection of the Modem support 100Mbps Ethernet?

The Modem supports 100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Modem.

Appendix A: Troubleshooting

24

Frequently Asked Questions

Image 30
Contents ADSL2 Modem How to Use this Guide Copyright and TrademarksWord definition Table of Contents ADSL2MUE Modem with USB and Ethernet Back Panel Front PanelPPPoA Introduction WelcomeWhat’s in this Guide? Introduction What’s in this Guide? Getting to Know the ADSL2 Modem USBDSL Connecting the ADSL2 Modem Connecting the Modem using an Ethernet ConnectionOverview Connecting the Modem using a USB Connection USB ConnectionInstalling the USB Driver Windows XPWindows 2000 Search Select CD-ROM drives, and click NextOn the Driver Files Search Results screen, click Next 2000 Search ResultsWindows Millennium Me Locating Software12 98 Search 16 98 Install Best Driver Installation is complete Configuring the ADSL2 Modem Setup Tab Basic SetupInternet Setup RFC 1483 Bridged Dynamic IP RFC 2516 PPPoE Bridged Mode Only Administration Tab Security Modem PasswordDiagnostics Factory DefaultStatus Tab Firmware Upgrade Status Tab ModemStatus Tab Local Network 14 Local NetworkAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a computer ADSL2MUE Modem with USB and Ethernet To start over, I need to set the Modem to factory default Need to upgrade the firmwareMy DSL service’s PPPoE is always disconnecting Where is the Modem installed on the network? Frequently Asked QuestionsPower LED flashes continuously Is IPSec Passthrough supported by the Modem?Is the Modem cross-platform compatible? Can the Modem act as my Dhcp server?ADSL2MUE Modem with USB and Ethernet Figure B-1 Upgrade Firmware Appendix B Upgrading FirmwareAppendix C Glossary ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet ADSL2 Modem with USB and Ethernet Appendix D Specifications Appendix E Warranty Information WarrantyAppendix F Regulatory Information FCC StatementSafety Notices EC Declaration of Conformity European Community Appendix G Contact Information Europe Mail AddressOutside of Europe Mail Address

ADSL2MUE specifications

The Linksys ADSL2MUE is a versatile and robust ADSL modem that caters to both home and small business needs. It is designed to provide a reliable high-speed internet connection over a standard telephone line, making it an essential device for users in areas where cable or fiber connections are not available. This modem is equipped with advanced capabilities to effectively support ADSL2 and ADSL2+ technologies, which significantly enhance the performance and quality of internet connections.

One of the standout features of the Linksys ADSL2MUE is its ability to achieve downstream speeds of up to 24 Mbps and upstream speeds of up to 1 Mbps, which allows for a seamless online experience. The modem operates efficiently on both ADSL and ADSL2+ lines, adapting to available bandwidth conditions to optimize performance. This versatility makes it a suitable option for a variety of applications, including streaming, gaming, and video conferencing.

The device utilizes a built-in Ethernet port that enables easy connection to a router or switch, facilitating the sharing of internet access among multiple devices within a network. This feature is particularly important in today’s connected world, where numerous devices often rely on a single internet source. Additionally, the Linksys ADSL2MUE supports Network Address Translation (NAT), which enhances security by allowing multiple devices to share a single public IP address.

When it comes to installation and configuration, the ADSL2MUE is designed for convenience. The process is simple and can be achieved through a web-based interface, which provides users with an intuitive means of managing settings and monitoring connection status. The modem also includes a built-in firewall that further secures the network against external threats.

In terms of build and design, the Linksys ADSL2MUE is compact and lightweight, making it easy to fit into various setups without consuming excessive space. This design is in line with Linksys's reputation for creating user-friendly and aesthetically pleasing networking equipment.

Overall, the Linksys ADSL2MUE modem stands out for its advanced ADSL technologies, high-speed internet capabilities, ease of installation, and robust security features, making it a reliable choice for users seeking a dependable internet connection in a variety of environments. Its balanced features and practical design ensure that it meets the demands of modern internet usage effectively.