Airlink101 AWLL3026 user manual Configuring USB Adapter as a Wireless Client

Page 10

3. Configuring USB Adapter as a Wireless Client

The USB adapter can be set to either Station or Access Point Mode from the Mode drop-down menu. Station mode is the default selection and should be selected if you want to connect to a wireless router/access point or conduct peer-to-peer networking.

To open the utility, go to Start, (All) Programs, IEEE 802.11g USB Wireless LAN Adapter, IEEE 802.11g USB Wireless LAN Utility.

Note to Windows XP Users:

If you encounter the Wireless Zero Configuration dialog box, click Yes to enable the Wireless LAN Utility to configure your USB adapter.

10

Image 10

Contents 802.11g USB 2.0 Adapter Model # AWLL3026 User’s Manual Table of Contents Interference Statement FCC CautionPackage Contents FeaturesIntroduction Install Utility Software Installation ProceduresClick Install Driver and Utility from the Setup menu Page Page Install Driver Select Install the software automatically and click NextPage Configuring USB Adapter as a Wireless Client Point Page Configuring General Settings Configuring Encryption Security Page Click on WPA Encryption Setting and click Change Configuring Profile Advanced Settings Information Configuring Access Point Configuring USB Adapter as an Access PointChannel Page Authentication Mode select from Open System or Shared Key Configuring MAC Address Filter Filter Type Specifications AppendixTroubleshooting For Windows 98SE/ME Technical Support