Airlink101 AWLL3026 user manual Configuring Encryption Security

Page 22

4.2 Configuring Encryption Security

Select Enable from the WEP drop-down menu and click Setting.

Key Length: Select the appropriate encryption key length.

Default Key ID: Select which of the four Key Value you want to use.

Key Format: Select either Hexadecimal (0-9, A-F) or ASCII (any number or letter).

Key Value: Enter the applicable key values. Up to four key values may be entered. Note the following rules when entering Key values:

64-bitkey length requires 10 Hexadecimal characters (0-9, A-F) or 5 ASCII characters (any number or letter).

128-bitkey length requires 26 Hexadecimal characters (0-9, A-F) or 13 ASCII characters (any number or letter).

256-bitkey length requires 58 Hexadecimal characters (0-9, A-F) or 19 ASCII characters (any number of letter).

Authentication Mode: select from Open System or Shared Key.

Fragmentation Threshold: choose from 256 to 2346 bytes.

RTS/CTS Threshold: choose from 0 to 2347 bytes.

Preamble: select Long or Short.

MAC Address Filter: click Setting.

22

Image 22
Contents 802.11g USB 2.0 Adapter Model # AWLL3026 User’s Manual Table of Contents Interference Statement FCC CautionPackage Contents FeaturesIntroduction Install Utility Software Installation ProceduresClick Install Driver and Utility from the Setup menu Page Page Install Driver Select Install the software automatically and click NextPage Configuring USB Adapter as a Wireless Client Point Page Configuring General Settings Configuring Encryption Security Page Click on WPA Encryption Setting and click Change Configuring Profile Advanced Settings Information Configuring Access Point Configuring USB Adapter as an Access PointChannel Page Authentication Mode select from Open System or Shared Key Configuring MAC Address Filter Filter Type Specifications AppendixTroubleshooting For Windows 98SE/ME Technical Support