Airlink101 AWLL3026 Configuring USB Adapter as an Access Point, Configuring Access Point, Channel

Page 20

4. Configuring USB Adapter as an Access Point

4.1 Configuring Access Point

You can configure the USB Adapter as an access point for other wireless clients on your network.

Note: You will not be able to access the Internet if you configure the USB adapter as an access point. To allow other wireless clients to access the Internet, you will need to configure your computer as a router and a DHCP server. The vendor will not provide any technical support in regards to the USB adapter functioning as an access point.

Select Access Point from the Mode drop-down menu.

The default settings for the access point are as follows:

Channel: 6

SSID: WLAN_AP

WEP: Disable

Tx Power: Level 0

To configure the access point, click on More Setting.

20

Image 20
Contents 802.11g USB 2.0 Adapter Model # AWLL3026 User’s Manual Table of Contents Interference Statement FCC CautionIntroduction FeaturesPackage Contents Click Install Driver and Utility from the Setup menu Installation ProceduresInstall Utility Software Page Page Install Driver Select Install the software automatically and click NextPage Configuring USB Adapter as a Wireless Client Point Page Configuring General Settings Configuring Encryption Security Page Click on WPA Encryption Setting and click Change Configuring Profile Advanced Settings Information Channel Configuring USB Adapter as an Access PointConfiguring Access Point Page Authentication Mode select from Open System or Shared Key Configuring MAC Address Filter Filter Type Specifications AppendixTroubleshooting For Windows 98SE/ME Technical Support