Airlink101 AWLC6070 user manual Open the Wireless Monitor

Page 29

Open the Wireless Monitor.

Click on Profile Setting, then click on New.

The profile settings box will appear.

First change the network type to Adhoc. (Infrastructure is for when you are using a router).

Enter a profile name into the Profile Name box so that you can identify the profile.

Type in a network name (SSID) into the SSID box

Select your desired Channel

You can also choose between no security or WEP security. If you choose WEP security, you can follow the instructions in the Configuring Encryption section of the manual.

Click OK to save the profile.

29

Image 29

Contents 150N Draft 802.11n Wireless Cardbus Adapter Table of Contents Introduction Package ContentsFeatures Installation Page Click Next at the welcome screen Click Next to accept the default destination folder Page Page Select Install the software automatically and click Next Page Click Finish Configuring the Adapter Page Page Page Page Wireless Information Wireless MonitorAP List Profile Settings Page Click on Profile Settings then New Configuring EncryptionPage Select WEP from the Set Security Option box Configuring WEP encryptionSelect WPA/WPA2-PSK from the Set Security Option box Configuring WPA/WPA2-PSK Encryption for home usersSelect WPA/WPA2 from the Set Security Option box Configuring WPA/WPA2 Encryption for corporate networksSelect 802.1x from the Set Security Option box Configuring 802.1x authentication for corporate networksAd-hoc and Peer-to-Peer Wireless Networks Open the Wireless Monitor Page About Appendix a Features Federal Communication Commission Interference Statement Appendix B InformationEuropean Union Notice Mailsupport@airlink101.com Technical Support