Airlink101 AWLH6090 user manual Wi-Fi Protected Setup WPS

Page 31

4.6 Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup™ (WPS) is a new and easy way to configure the encryption for your wireless network clients to connect to your router. If your wireless router does not support WPS feature or it is disabled on your router (WPS is disabled when you use WEP as the wireless encryption), you will need to set up the wireless security manually and you can skip this section.

In the instructions below, we are going to use the utility, Wireless Monitor that comes with the Airlink101 Wireless 300N adapters and the AR690W Airlink101 Wireless 300N router as the example.

Step 1 Go to the computer with the Wireless 300N adapter and open the Airlink101 Wireless Monitor. Click on the WPS Connect button.

Step 2 Choose your configuration method, either Push Button or Pin Code and click Next.

31

Image 31
Contents Wireless 300N PCI Adapter Table of Contents Features Package ContentsIntroduction Installation Page Page Page Page Page Select Install the software automatically and click Next Page Click Finish Configuring the Adapter Page Page Page Page Wireless Information Wireless MonitorAP List Profile Settings Page Click on Profile Settings then New Configuring EncryptionPage Configuring WEP encryption Select WPA/WPA2-PSK from the Set Security Option box Configuring WPA/WPA2-PSK Encryption for home usersSelect WPA/WPA2 from the Set Security Option box Configuring WPA/WPA2 Encryption for corporate networksSelect 802.1x from the Set Security Option box Configuring 802.1x authentication for corporate networksAd-hoc and Peer-to-Peer Wireless Networks Open the Wireless Monitor Page Wi-Fi Protected Setup WPS Page Page Page Click Finish on the WPS Connection screen About Appendix a Features Federal Communication Commission Interference Statement Appendix B InformationFCC Radiation Exposure Statement IC Radiation Exposure Statement Industry Canada StatementMailsupport@airlink101.com Technical Support