Airlink101 AWLH6090 user manual

Page 30

Once that is done, click on the AP List.

Select your new profile from the profile chooser and click Activate to enable the profile.

You will need to configure all other computers that you are planning on connecting to your ad-hoc network with the same settings that you input on this screen. Every computer has to be set up exactly the same. If any of the settings are different, the network will not function.

Troubleshooting: If you are having trouble connecting, if the connection is slow, or if it is unstable, you will want to try changing channels. Start with channel 1 and work your way up until you find a channel that gives you a stable connection. Each time you change the channel, save the settings, then reboot the computer. Also make sure that you do this on every ad-hoc machine so that they will all be set to the same channel.

30

Image 30
Contents Wireless 300N PCI Adapter Table of Contents Package Contents FeaturesIntroduction Installation Page Page Page Page Page Select Install the software automatically and click Next Page Click Finish Configuring the Adapter Page Page Page Page Wireless Monitor Wireless InformationAP List Profile Settings Page Configuring Encryption Click on Profile Settings then NewPage Configuring WEP encryption Configuring WPA/WPA2-PSK Encryption for home users Select WPA/WPA2-PSK from the Set Security Option boxConfiguring WPA/WPA2 Encryption for corporate networks Select WPA/WPA2 from the Set Security Option boxConfiguring 802.1x authentication for corporate networks Select 802.1x from the Set Security Option boxAd-hoc and Peer-to-Peer Wireless Networks Open the Wireless Monitor Page Wi-Fi Protected Setup WPS Page Page Page Click Finish on the WPS Connection screen About Appendix a Features Appendix B Information Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Industry Canada Statement IC Radiation Exposure StatementTechnical Support Mailsupport@airlink101.com