AT-2701 Series Fast Ethernet Adapter Installation Guide
Speed/Duplex
The Speed/Duplex property sets the link speed and duplex mode of the adapter.
To change the Speed/Duplex property, do the following:
1.Access the Advanced Properties.
See “Accessing Advanced Properties” on page 60.
2.Select Speed/Duplex in the Property box.
The Speed/Duplex page is displayed as shown in Figure 35.
Figure 35. Speed/Duplex Page
3.Select one of the following options:
(1) 100Mb/Half Duplex
(2) 100Mb/Full Duplex — This is the default setting.
4.Click OK.
67