AT-2701 Series Fast Ethernet Adapter Installation Guide
Figure 44. Command Window with ipconfig/all displayed
4.Type ping <IP address> from the command line, then press Enter.
The network connectivity information is displayed, as shown in Figure 45.
Figure 45. Command Window with ping displayed
Linux To verify that the Ethernet interface is up and running, run 'ifconfig' to check the status of the Ethernet interface. In addition, you can use the 'netstat -i' command to check the statistics on the Ethernet interface. Consult the manual pages for more information about the 'ifconfig' and 'netstat' commands.
85