AT-2701 Series Fast Ethernet Adapter Installation Guide
Speed/Duplex (Copper)
The Speed/Duplex (Copper) property sets the link speed and duplex mode for the twisted pair copper interface.
To change the Speed/Duplex (Copper) property, do the following:
1.Access the Advanced Properties.
See “Accessing Advanced Properties” on page 60.
2.Select Speed/Duplex (Copper) in the Property box.
The Speed/Duplex (Copper) page is displayed as shown in Figure 37.
Figure 37. Speed/Duplex (Copper) Page
3.Select one of the following options:
(0) Auto Negotiate — The speed and duplex mode are automatically negotiated. This is the default setting.
(1) 100Mb/Half Duplex
(2) 100Mb/Full Duplex
(3) 10Mb/Half Duplex
(4) 10Mb/Full Duplex
4.Click OK.
69