Allied Telesis AT-2916SX, AT-2972SX, AT2972SX/2 manual Vlan ID

Information Provided by the BACS 2 Applications

BACS 2 Features

Advanced Control Suite User’s Guide

The Broadcom Advanced Control Suite 2 lists all of the network adapters in your computer and provides the following information, if available, about each device, as shown in Table 1.

Table 1. BACS Application Information

Driver Status	Driver Version	Frames Rx OK
MAC Address	Driver Date	Team Name
Link Status	Firmware Version	Team Type
IP Address	ASIC Version	VLAN Name
Memory Address	Bus Type	VLAN ID
Physical Address	Bus No.	BASP Tx Packet
Speed	Device No.	BASP Tx Packet
		Discarded
Duplex	Function No.	BASP Tx Packet
		Queried
Slot No.	Interrupt Request	BASP Rx Packet
Driver Name	Frames Tx OK	BASP Rx Packet
		Discarded

The following features are accessible from the BACS 2 application:

ˆ“Vital Sign Tab” on page 27. Provides at-a-glance status reports on all of the LAN devices in your computer.

ˆ“Resources Tab” on page 30. Displays the system resources of the selected device.

ˆ“Hardware Tab” on page 31. Displays the hardware information (the ASIC version and the firmware version) for the selected device.

ˆ“Advanced Tab” on page 32. Allows you to change the advanced properties.

ˆ“Network Test Tab” on page 35. Confirms network connectivity to a remote station. The network test sends ICMP packets to remote systems and waits for a response. If a gateway is configured, the test automatically sends packets to that system. If a gateway is not configured or if the gateway is unreachable, the test prompts you for a destination IP address.

ˆ“Diagnostics Tab” on page 36. Performs comprehensive diagnostics on Broadcom network adapters.

ˆ“Statistics Tab” on page 38. Provides detailed performance statistics on each selected device.

21