Alloy Computer Products POE100 Series manual Colour Function

7. LED Description

The following table describes the LED’s located on the POE100 Series media converter.

LED	Colour	Function
FX LNK/ACT	Green	Lit when fibre connection has link
		Blinks when fibre data is present
FX		Lit when full-duplex mode is active
	Amber	Off when half-duplex is active
FDX/COL
		Blinks when collision is present
TP LNK/ACT	Green	Lit when Copper connection has link
		Blinks when Copper data is present
TP 100	Green	Lit when Copper speed is 100Mbps
		Off when Copper speed is 10Mbps
PWR	Green	Lit when +5V power is supplied
PoE PSE-TP	Green	Lit when PoE power output is active
	Red	Lit when PoE power output is disrupted
		(In case of over temperature or over current )
4W	Green	Lit when PD Class Type is Class 1
7W	Green	Lit when PD Class Type is Class 2
15.4W	Green	Lit when PD Class Type is Class 0 or 3

8. DIP Switch Configuration

Fig. 10 Reset button and S1 – Bit 1, 2, 3, 4, 5, 6, Configuration and Settings

Reset		: If S1-1, S1-2, S1-3, S1-4 or S1-5 status is
			changed, please press this button for your
			settings to take effect.
S1-1 TP Port Mode		:	AUTO(Default) or FORCE
S1-2	TP Port Speed	: 100 or 10 when TP is at Force
S1-3	TP Port Duplex	: FDX or HDX when TP is at Force
S1-4 LFP		: LFP Enabled (Default) or Disabled
S1-5	Fibre Port Duplex	: 100FDX (Default) or 100HDX
S1-6 POE ON/OFF		:	Enabled (Default) or Disabled