Allied Telesis AT-AR020 PRI EI/TI, AT-AR027VOLP-FXS, AT-AR021 (S)BRI-S/I manual Port Interface Card

Page 3

2

Port Interface Card

Port Interface Card Installation and Safety Guide

Document Number 613-000601 Rev C.

© 2007 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc.

Allied Telesis, Inc. reserves the right to change specifications and other information in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Allied Telesis, Inc. be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Allied Telesis, Inc. has been advised of, known, or should have known, the possibility of such damages.

Allied Telesis and AlliedWare are trademarks or registered trademarks in the United States and elsewhere of Allied Telesis, Inc. Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Microsoft and Visio are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Additional brands, names and products mentioned herein may be trademarks of their respective companies.

Image 3
Contents Installation and Safety Guide Installation and Safety Guide Port Interface Card This expansion bay Accepts Compatible Switches and RoutersInstallation and Safety Guide About this GuideChoosing a PIC Bay Package ContentsInstalling a PIC Jumper Function Default Slide the PIC into place Setting the Isdn Territory Set the interface for the VoIP traffic Downloading VoIP FirmwareManager set voip fi=hs-1-0-0.bin protocol=h323 Obtaining Documentation and Resources Telecommunications Interfaces Important Safety Instructions