Allied Telesis C613-16164-00 REV E manual Configure VRF-lite

Page 59

Configuring a complex inter-VRF solution

!

ip vrf shared 5 rd 100:5

route-target import 100:1 route-target import 100:2 route-target import 100:3 route-target import 100:4 route-target export 100:5

!

ip vrf overlap 6

!

no ip multicast-routing

!

spanning-tree mode rstp

!

access-list hardware access43 permit ip any 192.168.43.0/24 access-list hardware access44 permit ip any 192.168.44.0/24 access-list hardware access45 permit ip any 192.168.45.0/24

access-list hardware allow100_deny_private permit ip any 192.168.100.0/24

deny ip any 192.168.0.0/16 access-list hardware allow_to_self_10 permit ip any 192.168.10.0/24 access-list hardware allow_to_self_20 permit ip any 192.168.20.0/24 access-list hardware allow_to_self_30 permit ip any 192.168.30.0/24 access-list hardware allow_to_self_40 permit ip any 192.168.40.0/24

!

switch 1 provision x900-24

!

vlan database

vlan 2-7 state enable

!

interface port1.0.1 switchport switchport mode access

access-group allow_to_self_10 access-group access43 access-group allow100_deny_private

!

interface port1.0.2 switchport switchport mode access switchport access vlan 2 access-group allow_to_self_20 access-group access44 access-group allow100_deny_private

!

interface port1.0.3 switchport switchport mode access switchport access vlan 3 access-group allow_to_self_30 access-group access45 access-group allow100_deny_private

!

interface port1.0.4-1.0.5 switchport

switchport mode access

Configure VRF-lite Page 59

Image 59
Contents What is VRF-lite? How To Configure VRF-lite IntroductionWhich products and software version does it apply to? Software feature licensesCommand summary Who should read this document?Contents VRF GlossaryUnderstanding VRF-lite Vlan5 VRF-lite security domainsRoute table and interface management with VRF-lite Interface management with VRFAdding a VRF-aware static ARP Route management with VRFInter-VRF communication Static and dynamic inter-VRF routing For example VRF-lite features in AW+ Ping VRF aware services includeRoute limiting per VRF instance VRF-aware utilities within AW+ TCP dump  Telnet client SSH client Awplusconfig# access-list standard Configuring VRF-liteAwplusconfig-if#switchportaccess vlanx Family Awplusconfig-route-map#match ip Ip route 192.168.50.0/24 Ip route vrf green 192.168.1.0/24 Static inter-VRF routingForwarding Information Base FIB and routing protocols Dynamic inter-VRF communication explainedBGP Inter-VRF communication via BGP Can be replaced with Using the route-target commandRoute-target import ASNVRFinstance For example Route-target both ASNVRFinstance For exampleVia BGP IVR, VRF shared will end up with the routes Also, if VRF shared configuration includesIf VRF red initially includes If VRF shared initially includesThen via BGP IVR, VRF red will end up with the routes If VRF shared configuration includesViewing source VRF and attribute information for a prefix How VRF-lite security is maintainedMultiple VRFs without inter-VRF communication Simple VRF-lite configuration examples26 Configure VRF-lite Vlan 28 Configure VRF-lite Configure VRF-lite 30 Configure VRF-lite Configure VRF-lite 32 Configure VRF-lite Inter-VRF configuration examples with Internet access Configuration Configure VRF-lite Example B Configuration 38 Configure VRF-lite Configure VRF-lite Example C Configuration 42 Configure VRF-lite Configure VRF-lite  Each VLANs is associated with a VRF instance Configuring a complex inter-VRF solutionNetwork description VRF communication plan Configuration breakdown Configure VRF-lite Configure Vrfs Configure the hardware ACLs 192.168.43.0/24 via the shared VRF This example, three access groups are attached to portWithin the same IP subnet that the switch port is a member Configure Vlan Database Configure IP Addresses Configure VRF-lite Configure Dynamic Routing Configure VRF-lite 56 Configure VRF-lite Configure Static Routing Complete show run output from VRF device is below Configure VRF-lite 60 Configure VRF-lite Configure VRF-lite IP route table from VRF device is below VRF blue Hostname Internetrouter Hostname sharedrouter N1 Ospf Nssa Hostname redospfpeerHostname greeniBGPpeer Hostname bluerippeer Hostname orangerouter Hostname orangeospfpeer Grey Other features used in this configurationVCStack and VRF-lite Stack provisioningVirtual Chassis ID X610 VCStack configurationX900 configuration 74 Configure VRF-lite Port Sharing VRF routing and double tagging on the same portCommunication plan GreenX610 B ConfigurationsX610 a Configure VRF-lite Additional notes BGP configuration tips 80 Configure VRF-lite VRF device Red router vlan database Red router Route Limits Configuring static route limits100 Configuring Dynamic route limitsAllowed number of fib routes excluding Connect and Static Syntax No max-fib-routesVRF-lite usage guidelines Routing general Useful VRF-related diagnostics command listGeneral Routing protocols IP prefix network, e.g TCPdump HW platform table commands

C613-16164-00 REV E specifications

The Allied Telesis C613-16164-00 REV E is a robust networking device designed to enhance connectivity and communication within enterprise environments. Renowned for its reliability and efficiency, this device serves as an ideal choice for organizations seeking to improve their network infrastructure.

At its core, the C613-16164-00 REV E is a part of Allied Telesis' suite of products that adhere to high-performance standards. One of the main features is its support for both Layer 2 and Layer 3 networking, making it versatile enough to handle a variety of network configurations. This capability allows for seamless integration into different network architectures, whether for simple local area networks (LANs) or more advanced setups with routing capabilities.

Another significant characteristic of the C613-16164-00 REV E is its high-speed data transfer capabilities. With support for Gigabit Ethernet, the device ensures that data can be transmitted quickly and efficiently across the network. This is particularly important for businesses that rely on heavy data usage and need to maintain performance standards even during peak hours.

Additionally, the C613-16164-00 REV E features advanced security measures, including VLAN support and port security configurations, which help protect sensitive information and prevent unauthorized access. This is essential for businesses that handle confidential data and must comply with industry regulations.

In terms of manageability, the device supports SNMP (Simple Network Management Protocol), allowing for easy monitoring and management of network resources. Network administrators can efficiently manage the device and optimize performance with minimal effort, improving overall productivity.

The design of the C613-16164-00 REV E is also noteworthy; it is built for durability, often featuring a compact form factor that makes installation straightforward without compromising on performance. Its compatibility with various Allied Telesis products ensures that organizations can build a cohesive network ecosystem.

In conclusion, the Allied Telesis C613-16164-00 REV E stands out as an excellent networking solution characterized by its support for multiple networking layers, high-speed data transfer, and robust security features. Ideal for both small to medium enterprises and larger organizations, it helps ensure that businesses can maintain efficient and secure operations in a constantly evolving digital landscape.