Altinex manual About Your MT103-115, Technical Specifications

MULTI-TASKER™

ABOUT YOUR MT103-115 2

MT103-115

2-In 2-Out VGA to CAT-5 Transmitter

The MT103-115is a 2-in 2-out VGA to CAT-5 transmitter card. The MT103-115card transmits computer video signals over twisted pair CAT-5 (Category 5, 5e, 6) type cable. The MT103-115must be used with a compatible CAT-5 receiver like the MT103-116 card or the stand alone DA1921SX receiver.

The use of CAT-5 cable is an alternative to the traditional method of using RGB or VGA type multi-channel coaxial cable. This solution is very desirable due to the fact that CAT-5 cable is thinner, more flexible and less costly than multi-channel coaxial cable. Furthermore, many facilities already have a CAT-5 cable infrastructure, allowing this solution to reduce the amount of labor and intrusion required for retrofit installations.

The MT103-115offers two 15-pin HD female input connectors (Plug & Play compatible with built-in EDID), and two RJ-45 female output connectors. The MT103-115can transmit signal resolutions from VGA thru UXGA. Together with an MT103-116 receiver card and properly adjusted with built-in equalization controls, the maximum cable distance is approximately 500 feet/152 meters for VGA (640x480, 60Hz refresh) and 250 feet/ 76 meters for UXGA (1600x1200, 60Hz refresh). Please see the complete specifications for other resolutions.

	TECHNICAL SPECIFICATIONS			3
	FEATURES/DESCRIPTION		MT103-115
	GENERAL
	Inputs		Two
	Input from Transmitter		RJ-45 Female
	Outputs		Two
	Output Connectors		15-pin HD Female
	Cable Distance		Limitations
	640x480: 500ft/152m	1280x1024: 350ft/107m
	800x600: 450ft/137m	1600x1200: 250ft/76m
	1024x768: 400ft/122m
	Table 1. MT103-115General
	MECHANICAL		MT103-115
	Enclosure Slots Required		One
	Weight		0.43lb (0.19kg)
	Shipping Weight		1 lb. (0.42kg)
	Connector Panel		Black
	T° Operating		10°C-40°C
	T° Maximum		0 to 50°C
	Humidity		90% non-condensing
	MTBF (calc.)		55,000 hrs
	Table 2. MT103-115Mechanical
ELECTRICAL			MT103-115
Input Video Signal
Analog Signal Level			1.7V max
Impedance			75 Ohms
Input Sync Signal
Horiz., Vertical, & C-Sync			TTL (+/-)
Impedance			10K Ohms
Output Video Signals
Analog Signal Level			Gain of 1.05 (+/-5%)
Fall/Rise Time (ns)			1.0
Impedance			75 Ohms
Output Sync Signals
Horizontal, Vertical Sync			TTL (+/-)
Impedance			22 Ohms
Power
Power (from Enclosure)			+6V DC (230mA)
			-6V DC (200mA)
Power Consumption			2.6 watts max.

Table 3. MT103-115Electrical

400-0182-003 3